Universal brackets

E No:

MP-number: 981Z

The bracket for corrugated sheets is suitable for ridge bottoms with width B. In its split state and in combination with the support bracket, the bracket fits all ridge bottoms. The mounting angle has three holes with a diameter of Ø 4.2 mm, intended for 4 mm blind rivets or self-drilling sheet metal screws, not countersunk, of suitable length. Maximum load: 125 kg. Breaking load: equal to or greater than 1.7 times the maximum load. To determine the maximum load capacity of the fastening, consult the supplier's load values for roof sheeting and blind rivets/sheet metal screws.

All variants All variants

Product details

MP-number 981Z
EAN 7394333956893
Length 75 mm
Width 65 mm
Height 25 mm
Weight 0.16 kg
Climate impact 0.453 kgCO2e
Surface treatment Hot-dip galvanized 55 µm
Corrosion class C4
Adjustable width 60–95 mm
Suitable for Cable ladders, Cable trays, Wire ladders

Documents

Environmental data galvanized Z_en-GB.pdf

Certifications

Comments on the product

Do you have any comments on the product? Please contact us if you have any feedback on this product. Use the link to access our product feedback form.

Variants

MP-number	Adjustable width	Color	Surface treatment	Corrosion class
980S	40–60 mm		Pre-galvanized 20 µm	C2	Select
981S	60–95 mm		Pre-galvanized 20 µm	C2	Select
982S	95–150 mm		Pre-galvanized 20 µm	C2	Select
980V	40–60 mm	NCS S 0500-N (white)	Lacquered	C1	Select
981V	60–95 mm	NCS S 0500-N (white)	Lacquered	C1	Select
982V	95–150 mm	NCS S 0500-N (white)	Lacquered	C1	Select
980Z	40–60 mm		Hot-dip galvanized 55 µm	C4	Select
981Z	60–95 mm		Hot-dip galvanized 55 µm	C4	Selected
982Z	95–150 mm		Hot-dip galvanized 55 µm	C4	Select