Machine list
In order to deliver to our customers what they want, competent staff and access to the right equipment are required. On this page, you will find our machines and a little bit about what they can perform. If you have any questions or want to know more about our machines, do not hesitate to contact us.
Multi-tasking machines
A multi-operation machine is an advanced machine tool used in the manufacturing industry to perform several different machining operations on the same machine. These machines are highly efficient as they can carry out various types of machining without the workpiece needing to be moved to different machines. This saves time, reduces handling of the workpiece, and increases the precision and quality of the machined parts.
Nicholas Correa FOX 40
Working area:
4000x3000x1500 mm
Performance:
10000 rpm HSK100
Other:
5-axis machining, Universal head 0.02°x0.02°. 15 tons table load
Deckel Maho DMF 260
Working area:
2600x700x700 mm
Performance:
18000 rpm HSK63
Other:
Simultaneous 5-axis machining
Eumach LBM 1500
Working area:
1750x1000x750 mm
Performance:
18000 rpm HSK63
Other:
3-axis machining Mouldmaster
HAAS VF3-SSYT
Working area:
1016x660x635 mm
Performance:
12000 rpm HSK63
Other:
3-axis machining
Thread sparks
Wire EDM, or wire electrical discharge machining, is a machining method used in the manufacturing industry to cut and shape materials. It is a form of electrical discharge machining where a thin wire of metal (usually copper or brass) is used as an electrical electrode. The process involves gently guiding the wire through the workpiece while creating electrical discharges between the wire and the workpiece. These discharges generate extremely high temperatures, which melt and remove material from the workpiece in small controlled portions.
Fanuc C600iC
Working area:
600x400x300 mm
Agie Charmilles CUT 300
Working area:
550x350x400 mm
Agie Charmilles FI 440 SLP
Working area:
550x350x400 mm
Plansanders
Surface grinding, also known as flat grinding or surface sharpening, is a machining process where a grinding machine is used to remove imperfections and provide a smooth surface to the workpiece. It can be done to a precision of up to 0.005 mm.
Chevalier 2060 AD IV
Work area:
1600x550 mm
Chevalier 1640 AD II
Working area:
1200x400 mm
Hydraulic presses
A hydraulic press creates a high pressure in a cylinder by using pressurised oil that is forced through a piston moving downwards and can, with a mounted tool, manufacture large complicated parts, for example for the automotive industry.
APT ZF-10000
Working area:
4000x2200 mm
Performance:
1000 tons of pressing force
Other:
Stroke length: 1500 mm. Counterhold: 480 tons
Tranemo DPA 315
Working area:
2500x1200 mm
Performance:
315 tonnes of pressing force
Other:
Stroke length: 700 mm
Tranemo BTE 200S
Working area:
2500x1300 mm
Performance:
200 ton pressing force
Other:
Stroke length: 500 mm
Coordinate measuring machine
A coordinate measuring machine is used to measure a pressed sheet metal part and see if it meets the customer's specified requirements. The measurement uses CNC control programmed by the operator where a sensing probe detects where edges, surfaces, and holes are located. This is done with a very high precision, down to 0.005 mm.
DEA Global Silver Performance
Work area:
2000x1200x1000 mm
Other:
PC-Demis
3D Printer
A 3D printer is a machine that uses different types of molten plastic that it extrudes onto a plate in thin layers. Each layer is between 0.1–0.25 mm thick and gradually builds up the desired 3D model in plastic over time. This is a cost-effective way to visualise a detail before it or its tool is produced.
Stratasys F270
Working area:
254x254x305 mm
Other:
ABS, PLA, ASA
Cranes
Travellers are used to lift and transport heavy objects that can be difficult or impossible to handle manually. They are designed to be safe and efficient and can handle various large loads.
Abus
Span:
20 metres
Total capacity:
28 tonnes
Others:
Double beams 7+7 tonnes in each beam